Cyclone Silent 24E
TECHNICAL DATA
| MODEL | CYCLONE SILENT 24E |
| MAX WORKING PRESSURE | 350 bar |
| AIR DELIVERY FAD | 400 lt/min, 24,0m3 /h |
| STAGES | 4 |
| CYLINDERS | 4 |
| CYLINDER ARRANGEMENT | V |
| 1ST STAGE CYLINDER DIAMETER | 105 mm |
| 2ND STAGE CYLINDER DIAMETER | 55 mm |
| 3RD STAGE CYLINDER DIAMETER | 30 mm |
| 4RTH STAGE CYLINDER DIAMETER | 14 mm |
| PISTON STROKE | 89 mm |
| SPEED ROTATION | 700 rpm |
| 1ST STAGE PRESSURE | 2,2 bar |
| 2ND STAGE PRESSURE | 10,4 – 10,5 bar |
| 3RD STAGE PRESSURE | 52,0 – 54,0 bar |
| TRANSMISSION | V BELT |
| MOTOR POWER | 7,5kW – 10Hp / 400V/50Hz
8,5kW – 11Hp / 440V/60Hz (Class F, IP 55) |
| OIL CAPACITY | 2.1 LIT SYNTHETIC COMPRESSOR OIL
(2,3 with oil pump) |
| AIR OUTLET TEMPRERATURE | 50 – 8o C ABOVE AMBIENT TEMPERATURE |
| MAX PERMISSIBLE AMBIENT TEMPERATURE | +50 TO +450 C |
| COOLING AIR FLOW MIN REQUIRED APPROXIMATELY | 2700 m3/hr |
| MAX INCLINATION OF COMPRESSOR | 150 |
| NOISE LEVEL | 72dB |
| DIMENSIONS (L x W x H) | 81 X 124 X 178 cm |
| WEIGHT | 498-510 Kg |
| FILLING TIME OF CYL 10LT @ 225BAR | 5,6MIN ± 5% |
| FILLING TIME OF CYL 10LT @300BAR | 7,5 MIN ± 5% |
STANDARD EQUIPMENT |
| Micronic Air Intake Filter. |
| Condensate Separators after 1st, 2nd & 3rd Stage. |
| Final – 4th stage condensate separator. |
| Safety valves in all stages. |
| Combined BA Filter D110Χ728 including Coalescing Pre-filter (0,5mg/m3 oil residual) and 2x large (Active Carbon / Molecular Sieve) cartridge D65Χ260 each, with the supply of absolutely clean air exceeding by far the requirements of EN 12021:2014. |
| High efficiency aluminum cooler after 1st and 2nd stage. |
| Large Stainless Steel Intercoolers – aftercooler at 3rd and 4th stage. |
| Secondary large fan (600mm diam.) with independent electric motor for optimum compressor’s cabinet cooling, making it capable for continuous operation. |
| Inter stage pressure sensors in all stages providing emergency shutdown in case of overpressure. |
| High Temperature Alarm & Shutdown error via Analogue temperature sensor at final stage, for additional safety and accurate indications. |
| Automatic Condensate Drains with manual backups in all stages. |
| Automatic stop at the desirable pressure via analogue pressure sensor 400bar |
| Automatic restart at the desirable pressure via analogue pressure sensor 400bar |
| Pressure maintaining & non-return valve after final BA filter for extended BA filter lifetime. |
| Five (5) Kevlar* Filling Hoses (1.2m each) complete with DIN and INTERNATIONAL ‘’A’’ clamp Adaptors and lever operated on/off valves with automatic ventilation.
*Kevlar hoses are manufactured with very strong & resistant material and are pin pricked for air relief in atmosphere in case of damage. |
| Inter-stage manometers. |
| Built-In Vibration Pads. |
| Condensate collecting tank with level indication. |
| Soundproof insulation ensuring very low noise level. |
| Automatic belt tensioning system. |
| Low oil level Sensor / Alarm / Shut down (auto stop). |
| Start/Delta starting system. |
| 24V secondary voltage providing safety during routine operation. |
| Motor thermal overload protection. |
| Emergency Stop button. |
| Main switch |
Digital Controller incorporating :
Remark for service index: The controller warns every 38 operating hours for replacement of the BA cartridge. If the compressor reaches 40 operating hours and the BA cartridge is not replaced yet, it stops automatically and a trip code number appears on the display. The controller also warns every 990 operating hours for oil change, and if at 1.000 operating hours the oil is not changed yet, the compressor stops automatically and another trip code number appears on the display.
|
Note: Fuse box & Compressor Plug supplied by customer.
| OPTIONAL EQUIPMENT |
| 420 version including:
o 3rd stage intercooler extra o 4th stage aftercooler extra o 400bar solenoid valve @ final stage o 600bar analogue pressure sensor |
| Dual pressure filling facility, allowing 225/330 bar simultaneous filling via pressure regulator. |
| Extra Combined final BA Filter D110x728 including Coalescing Pre-filter (0,5mg/m3 oil residual) and 2x large (Active Carbon / Molecular Sieve) cartridge D65Χ260 each, with the supply of absolutely clean air exceeding by far the requirements of EN 12021:2014. |
| Special Voltage/Frequency: 230V/50– 60Hz – 3x230V/50-60Hz |
| Final stage condensate separator in replacement of the BA Filter (industrial use) |
| High Pressure outlet ¼’’ in replacement of filling hoses |
| Oil Pump Lubrication System c/w low oil pressure switch Alarm / Shut Down, oil cooler, oil filter & flow regulator |
| Voltage failure and phase rotation safety device. |
| Filter state control system, PARAMINA HUMIDITY CONTROL, a device with main target to control humidity of high pressure air via:
1. A Central monitoring unit with display, led indicators and menu navigation buttons. 2. A Humidity Sensor incorporated in stainless steel chamber. PARAMINA HUMIDITY CONTROL provides complete information regarding filters’ state (Filter OK – Filter Critical – Change Filter) in terms of humidity, giving the possibility at the same time, to check the reliability of all devices/systems that remove humidity from the air. The use of this device is intended only for this purpose and not for any other use (e.g. cannot replace laboratory humidity measurement devices). Power Supply: 230VAC 50-60Hz or 24VAC 50-60Hz or 24VDC Operating Temperature: +5oC to +45Oc Max. Operating pressure: 420bar Process connection: G1/4 thread § Every 2 years the sensor must be checked and recalibrated or else replaced. In networks with bad air quality, every year. § The humidity sensor is recommended to be installed in between final filter and pressure maintaining valve, vertically as per arrow indication. Power Supply: 230VAC 50-60Hz or 24VAC 50-60Hz or 24VDC Max working Pressure: 420bar |
| Carbon Dioxide (CO2) monitoring / alarm / shutdown system |
| OIL-VOC monitoring / alarm / shutdown system |
| Hydrogen Sulfide (H2S) monitoring / alarm / shutdown system. |
| Carbon Monoxide (Co) monitoring / alarm / shutdown system. |
Recommended Spares:
- Paramina HPA Oil n.:112755000 (2,1ltr per replacement – replacement every 1.000 working hours and once per year irrespective of the working hrs)
- AC/MS Cartridge n.:137000080 (2 pcs per replacement) or AC/MS/HP Cartridge p.n.:137000100 (2 pcs per replacement) replacement every 40 working hours @ 20 oC ambient temperature and every six months irrespective of the working hrs.
- Coalescing pre-filter cartridge n.:306049631 (1 pc per replacement-replacement every 200 working hours and once a year irrespective of the working hrs).
- Air intake cartridge n.:109714601 (1 pc per replacement-replacement every 200 working hours and once a year irrespective of the working hrs).
- Oil Pump Filter n.108000682 – when equipped with compressor (1pc per replacement – replacement every 1.000 working hours and once per year irrespective of the working hrs).
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.